A reprint of printed cartons or labels is rarely caused by the printer. It is caused by artwork that reached the plate with a dieline one version old, a bleed that stopped short, or a colour approved on a screen. The errors are small, repetitive, and cheap to catch before plates are made.
1. What a Reprint Actually Costs
Beyond the print run itself: the minimum order of board or film, two to four weeks of lead time, the filling slot that is lost, and sometimes air freight to protect a launch date. For a label on a 30 ml bottle the print cost may be modest; the schedule cost is not.
2. Dieline Version
Every carton, label and pouch has a dieline, and every dieline has a revision. Artwork built on revision two and printed on revision three will be off by a millimetre or two, which shows as text drifting toward a fold or a label wrapping short of the seam. Put the revision number in the file name and in the artwork margin.
3. Bleed and Safety Margin
Three millimetres of bleed is the usual minimum, five for corrugated and for anything printed flexo. Text and legal panels should stay 3 mm inside the trim, and 5 mm from a fold or a seam. White slivers at a trimmed edge come from missing bleed; cut-off text comes from ignoring the safety margin.
4. Spot Colour on the Wrong Stock
A brand colour approved as a coated Pantone reference will print differently on uncoated board, on white film and on metallised stock. Ask for a drawdown or a printed proof on the actual substrate. If the artwork mixes spot and process, confirm which elements are which before the plate is imaged.
5. Legal Text and Type Size
Ingredient lists, warnings and net content are where reprints get expensive. A minimum x-height is usually specified for the market, and the panel has to be readable on the finished pack, not on a screen at 300%. Check that the panel fits the printable area after the fold, and that the language set matches the market.
6. Market and Language Variants
One formula can carry six artworks. When variants multiply, files drift: an old address, a superseded claim, a missing symbol. Keep one master file per market with a version table, and never edit a variant directly from a sibling artwork without checking the differences line by line.
7. What Counts as a Proof
A soft proof on a calibrated screen is for layout. A contract proof is for colour. A printed proof on the production substrate is the only one that shows how ink sits on that board. For a new stock or a new print process, budget for the printed proof; it is a fraction of a reprint.
8. The Approval That Sticks
One named signatory, one dated PDF, one locked file with a checksum. Comments in email threads are not approval. A simple form listing dieline revision, bleed, colour references, proof type and language set takes ten minutes and prevents the argument that follows a bad print run.
9. Prepress as a Cost Line
Prepress, plates and proofs usually run a few hundred dollars on a first order and near zero on a repeat. That asymmetry is why the first order deserves the review and the repeat deserves a change log. Skipping the review to save a week can cost a month.
10. Where it fits
Print quality starts in a file, not on a press. Compare pack formats in products, read adjacent packaging notes in news, and see the material detail in the encyclopedia. For printed sets across cream jars, lock the dieline revision before approval.