S SAIMEIYA Cosmetic Manufacturing
S SAIMEIYA Cosmetic Manufacturing
Photostability: Light in Stability Testing
Home/ Encyclopedia/ Compliance

Photostability: Light in Stability Testing

Light exposure is the stability test most often skipped and most often regretted. Clear packaging, natural actives and bright retail shelves combine into colour loss nobody predicted.

Compliance 4 min read 18 Nov 2026

Key takeaways

  • A light study answers whether the pack protects the product on a bright shelf.
  • Exposure is usually quoted as about 1.2 million lux hours plus a near-UV dose.
  • Test the product in its commercial pack, with an unpacked control alongside.
  • Colour change and assay loss are separate findings and need separate conclusions.
  • Clear packs often need a light-protective secondary carton to keep the claim.

1. What a light study answers

A photostability study asks a narrow question: does the product change when exposed to light at the intensity it will meet in a shop, a warehouse or a bathroom shelf? It is not a test of the formula’s elegance or the pack’s beauty. It is the evidence behind a shelf-life claim for a product sold in a transparent bottle, and it is the reason some products ship in an opaque carton.

2. The exposure usually quoted

Most protocols use a total exposure of roughly 1.2 million lux hours, combined with a near-ultraviolet dose in the region of 200 watt hours per square metre. The exact figure is set by the protocol the brand adopts, and the important thing is that it is stated in the report. A study that describes exposure as “prolonged” cannot be compared with anything or repeated by anyone.

3. Samples and controls

Expose samples in their commercial pack, in the secondary pack, and bare in a clear container. The bare sample shows what the formula can survive; the packed sample shows what the customer will actually receive. Run an identical set in the dark as a control, because some changes over eight weeks happen with or without light and would otherwise be blamed on it.

4. Packaging is part of the test

A clear PET bottle transmits most of the visible range and a meaningful share of near-UV. Amber PET cuts a portion of it. An opaque tube or an aluminium laminate blocks almost all of it. Testing the formula in a glass beaker and concluding the product is light-stable ignores the pack that determines the outcome, and it is the most common flaw in submitted light data.

5. Reading the results

Assess colour, odour, pH, viscosity, emulsion integrity and the assay of any light-sensitive active, at the start, mid-point and end. Colour is judged instrumentally where possible, since visual comparison between two samples eight weeks apart is unreliable. A change that is visible but does not affect the assay is still a consumer-visible defect and belongs in the conclusion.

6. Colour change versus assay loss

These fail differently. A colour shift can occur with no loss of active, typically through oxidation of a fragrance component or a pigment, and it affects appearance only. An assay loss with no visible change is the more dangerous case, because nothing on the shelf warns the customer and the label claim quietly becomes inaccurate. Report both, and do not let a passing assay excuse a failing colour.

7. Clear packs and the claim

If the product cannot survive the exposure in a clear pack, the options are a light-protective pack, an antioxidant or UV absorber in the formula, or a shorter shelf life with a stated storage condition. Choosing a carton is usually the cheapest and most reliable. Choosing a shorter shelf life is usually the most expensive in commercial terms, because retail buyers notice.

8. Retest and reformulation routes

When a batch fails, first check whether the failure is in the formula or the pack by comparing the bare and packed samples. A formula problem needs an antioxidant, a chelator or a different active form. A pack problem needs a different material or an overwrap. Changing both at once makes the next result uninterpretable, which wastes the eight weeks the study costs.

9. What goes in the report

Record the exposure figures, the light source, the temperature and humidity during exposure, the pack configurations, the test intervals and the methods used. Include photographs of the samples at each interval alongside the instrumental data. A report that a brand owner can hand to a safety assessor without translation is the standard to aim for.

10. Where it fits

Light protection decides pack choice for facial essence and bio-collagen mask formats in particular. Related compliance notes are in encyclopedia, and products lists the packaging options.

Reference: Stability programme notes, 2025

Start a project

Ready to put your name on a formula?

Send a brief and our formulation team will come back with a costed proposal, sample plan and timeline — typically within two working days.

WhatsApp +86 13149918467
WeChat QR code Scan to add WeChat
Call +86 13149918467 [email protected]
Quote WhatsApp Call Products