S SAIMEIYA Cosmetic Manufacturing
S SAIMEIYA Cosmetic Manufacturing
Paper-Based Packs: The Moisture Risk
Home/ News/ Sustainability

Paper-Based Packs: The Moisture Risk

19 Nov 2026 1,758 reads Sustainability

Paper and moulded fibre are the fastest route to a lighter pack, and the fastest route to a swollen lid. Board gains and loses moisture with the room, and a container crossing a humid route will show it. Coating choice and design clearance decide whether that matters.

1. Board is never dry

Paperboard sits in equilibrium with the air around it, typically holding six to nine percent moisture at ordinary indoor humidity. Raise the humidity and the sheet absorbs water and expands, mostly across the grain. Lower it and the sheet shrinks. A pack designed at 50 percent humidity and shipped at 85 has already changed dimension before it reaches the customer.

2. Where the water comes from

A sealed container crossing a warm ocean can hold relative humidity above 80 percent for weeks, especially when the cargo itself carries moisture. Cartons and fibre packs buffer that humidity slowly, so the interior of a pallet stays wet long after the doors open. This is the mechanism behind container rain, and fibre is more sensitive to it than plastic.

3. What fails first

Edges swell before faces do, so the first sign is a lid that binds or a box that no longer squares. Printed surfaces scuff and offset when the coating softens. Above roughly 75 percent humidity and 25 degrees, mould can appear within two to three weeks, and recycled fibre carries a higher spore load than virgin fibre.

4. Coatings and what they buy

An uncoated board passes water vapour freely. A dispersion coating slows it, a thin polyethylene or PLA layer slows it more, and a foil-laminated structure slows it most. Each step adds cost and complicates the recyclability story. Match the barrier to the route, not to the most demanding market you might enter later.

5. Paper tubes for balm and powder

A spiral or convolute tube changes dimension across the seam far more than along it, so a lid fit that is perfect in one direction can jam in the other. Specify at least one millimetre of diametral clearance, use a coated inner liner where the product is oily, and test the closed tube for a week at elevated humidity before approving artwork.

6. Spore load and fungal resistance

Recycled fibre brings a higher and more variable spore load than virgin pulp. For dry products this is usually acceptable; for anything with available water it is not. Ask for a fungal resistance test on the finished pack, and hold packed product at 30 degrees and 75 percent humidity for four weeks as a routine check rather than an exception.

7. A transit test that means something

Twenty-eight days at 40 degrees and 75 percent relative humidity is a common accelerated condition for fibre packs, and it reproduces much of what a sea container does in a fraction of the time. Include packed product rather than empty packs, because the contents release moisture and change the internal climate. Photograph before and after with a ruler in frame.

8. Design rules that survive humidity

Run the grain along the dimension that can tolerate growth, keep a millimetre of clearance at every lid and joint, avoid tight interference fits, and never rely on friction alone to keep a lid on. Where the pack must be tight, add a plastic or lined component at the interface and let the fibre move around it.

9. Claims discipline

Recyclable is a property of the pack plus the local collection stream, not of the material alone. A board with a plastic window and a foil laminate is not recyclable in most kerbside systems, whatever the base material. State the claim with its condition attached, and check it against the markets you actually ship to before it goes on a carton.

10. Where it fits

Fibre packs suit our body butter and body scrub ranges where shipping weight matters. Related pack notes are in encyclopedia.

Keep reading

More from the plant floor

All news

Start a project

Ready to put your name on a formula?

Send a brief and our formulation team will come back with a costed proposal, sample plan and timeline — typically within two working days.

WhatsApp +86 13149918467
WeChat QR code Scan to add WeChat
Call +86 13149918467 [email protected]
Quote WhatsApp Call Products