S SAIMEIYA Cosmetic Manufacturing
S SAIMEIYA Cosmetic Manufacturing
Corrugated Cartons: ECT, Burst, Stack Height
Home/ Encyclopedia/ Packaging

Corrugated Cartons: ECT, Burst, Stack Height

ECT, Mullen burst, flute profile and stack height: the four numbers that decide whether a carton survives a container, including the humidity derating most specs forget.

Packaging 4 min read 16 Nov 2026

Key takeaways

  • ECT predicts stacking performance; Mullen burst correlates better with handling and puncture.
  • Board loses roughly a third of its compression strength between 50% and 90% relative humidity.
  • Safe stack height is compression strength divided by loaded box weight, with a safety factor.
  • A 20 mm pallet overhang costs more compression than most carton specifications allow for.
  • Die-cut windows and hand holes remove load-bearing corners, so specify one grade higher.

A carton specification is usually written once, copied for years, and rarely revisited until a pallet collapses in a warehouse. Two board tests, one humidity assumption and a stack height calculation cover most of what a shipping carton actually has to survive.

1. Two Tests, Two Numbers

Edge crush test measures the force a standing flute edge resists, reported in kilonewtons per metre or pounds per inch. Mullen burst measures the pressure a board face resists before rupture. They correlate loosely and badly at the extremes, so a specification naming one should not be approved on the strength of the other.

2. Which One Predicts Stack Failure

Stacking is a compression problem, so ECT is the better predictor. Burst correlates with handling damage and puncture more than with stack performance. For a shipper stacked six high in a container for five weeks, ask for ECT and a compression test on the finished box rather than a burst figure.

3. Flute Profiles and What They Buy

B flute is thin and prints well; C flute is thicker with better stacking; E flute is fine, rigid in small formats and popular for retail-ready packaging. Double wall BC is the export standard for heavy liquids. The choice trades board cost against cube, and cube is what you pay for on a pallet.

4. Safe Stack Height Is a Calculation

Take the box compression strength from a lab test, apply a safety factor of roughly three to five for warehouse conditions, then divide by the weight of one loaded box. The result is the safe stack. Most field collapses come from stacking one or two layers above that number, not from defective board.

5. Humidity Is the Hidden Derating

Board strength falls as moisture rises. A box rated at 50% relative humidity loses a third or more of its compression at 90%, which is close to the condition of a container on a tropical route. Any calculation that assumes lab humidity for a sea freight journey is optimistic by a wide margin.

6. Pallet Pattern and Overhang

A box that overhangs the pallet by 20 mm loses a disproportionate share of its compression, because the corner posts no longer carry the load. Column stacking is stronger; interlocking is more stable in transit. The compromise is usually a modified pattern at the corners.

7. Where Print and Die-Cuts Weaken

Flexographic printing over a large solid area breaks flute structure. Hand holes, die-cut windows and perforations remove the corners that carry load, so a box with a display window should be specified one grade higher than the same footprint without one. This is routinely forgotten when artwork changes.

8. Writing a Carton Specification

Name the board grade, flute, ECT or burst value, internal dimensions with tolerance, print coverage, and the compression requirement for the finished box. Add the pallet pattern and maximum stack height. Four lines of text prevent most of the arguments that follow a damaged shipment.

9. Field Failures and What They Look Like

A collapsed bottom layer with intact top layers points to humidity. A crushed corner on every box points to handling or overhang. A bulging side wall points to underfilled or overfilled cases. Reading the pattern of damage usually identifies the cause before any lab test is ordered.

10. Where it fits

Secondary packaging is part of the shipping decision. Review formats in products, read transport notes in news, and see material comparisons in the encyclopedia. For heavy liquid formats such as body wash, specify double wall before the first pallet is built.

Reference: Packaging engineering test notes, 2025

Start a project

Ready to put your name on a formula?

Send a brief and our formulation team will come back with a costed proposal, sample plan and timeline — typically within two working days.

WhatsApp +86 13149918467
WeChat QR code Scan to add WeChat
Call +86 13149918467 [email protected]
Quote WhatsApp Call Products