S SAIMEIYA Cosmetic Manufacturing
S SAIMEIYA Cosmetic Manufacturing
Drop and Vibration Testing for Export
Home/ Encyclopedia/ Packaging

Drop and Vibration Testing for Export

A carton that survives the factory floor can still arrive crushed after four weeks in a container. Drop, vibration and compression tests reproduce the damage that matters, before tooling.

Packaging 4 min read 16 Nov 2026

Key takeaways

  • Drop height falls as mass rises: about 60-90 cm for parcels of 1-5 kg
  • Sequence corner, edge, then face, and inspect the pack between drops
  • Random vibration of one to three hours models road and rail better than a sine sweep
  • Board loses strength with humidity, so run compression conditioned or derate
  • Test at the temperature the product meets in transit, not at lab ambient

A carton that survives the factory floor can still arrive crushed after four weeks in a container. Transport testing reproduces the damage that matters, in a sequence short enough to run before production. Skipping it moves the discovery to the customer’s warehouse, where the remaining options are a credit note and an air shipment.

1. What transport testing proves

It shows whether a pack survives a defined sequence of handling and vibration without losing integrity or saleability. It does not prove a pack unbreakable, and it does not replace sensible container loading. The useful output is a failure mode and a fix, not a certificate. A test with no failures usually means the sequence was too gentle.

2. Drop heights by package weight

Drop height scales inversely with mass. Parcels of 1-5 kilograms are typically tested from 60-90 cm onto a corner, an edge and a face. Cartons around 10-20 kilograms usually drop from 45-60 cm. The sequence matters more than the number, and inspection between drops is what makes the first failure the informative one.

3. Vibration profiles and duration

Random vibration at low acceleration for one to three hours approximates a road and rail journey better than a sine sweep, because real transport excites many frequencies at once. The pack is restrained as it would be in a container, and the test looks for abrasion, settling and loosened fasteners. Stacks should be vibrated at the height used in practice.

4. Compression and pallet stacking

Compression testing measures what a carton carries when a pallet is twelve high in a warm container. Board loses strength as humidity rises, and a carton rated for 300 kilograms dry may carry 180 kilograms at 85% relative humidity. Test conditioned or apply a generous derating, and check that the pallet pattern puts no corner over a void.

5. Condition before testing

Conditioning changes results more than expected. Cartons should be conditioned at controlled humidity before compression and drop, and filled packs tested at the temperature they will meet. A cream that softens at 35 C fails differently from one tested at 20 C. Test the worst realistic condition rather than the lab’s ambient.

6. Failure modes that show up

The recurring failures are corner crushing, sachet seam splitting, cap and pump separation, label edge lift and inner tray collapse. Product-specific ones matter more: a cracked jar shoulder, a split tube shoulder, powder leaking past a shaker, and patches that shift inside the sachet and fold over. Each points at a different fix.

7. Fixing the pack, not the test

Fixes are usually a heavier board grade, a smaller carton with less void, a corrugated fitment, an overlap rather than butt seal, a deeper cap skirt or a repositioned label. Raising test severity to prove a point is the wrong response. If a fix adds unit cost, it is normally still cheaper than return freight and a credit note.

8. Working with a freight forwarder

Ask how the cartons will actually be loaded, whether pallets are floor loaded or slip-sheeted, and how long a container sits before opening. Those answers change the test plan more than any specification. Photographs of a previous damaged shipment are the most useful input a forwarder can give, because they show the real failure.

9. Test reports a buyer accepts

A useful report states sequence, sample size, conditioning, measured values, photographs of failures and the decision. Reports giving only a verdict are hard to act on. Where an importer has its own protocol, follow it and record deviations. Keep a retained pack from the tested batch so a later field failure can be compared.

10. Where it fits

Transport performance is a pack specification item, settled before tooling. Related reading: pack structure notes in the encyclopedia, the packaging category in news, and heavy formats in body lotion and body scrub.

Reference: Packaging qualification notes, 2025

Start a project

Ready to put your name on a formula?

Send a brief and our formulation team will come back with a costed proposal, sample plan and timeline — typically within two working days.

WhatsApp +86 13149918467
WeChat QR code Scan to add WeChat
Call +86 13149918467 [email protected]
Quote WhatsApp Call Products